Infognition forum
September 23, 2019, 04:13:08 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Last Video Enhancer version: 2.2
 
   Home   Help Search Login Register  
Pages: [1] 2 3 ... 10
 1 
 on: Today at 03:04:38 PM 
Started by LorenHargrove - Last post by LorenHargrove
The mahindra tuv300 plus price  diesel variants starts at Rs. 9.98 lakh for P4 and goes up to Rs. 11.47 lakh for P8. Mahindra TUV300 Plus is available in 3 variants in India.

 2 
 on: September 20, 2019, 10:31:18 PM 
Started by JulianStone - Last post by JulianStone
Every mother wants her baby to look blond, making her look even more beautiful and everyone praising her baby. Today we are going to tell you some ways that you will be able to blonde your child in a few days. Bacha Gora Hone Ke Liye Kya Kare?

Bacha Gora Hone Ke Liye Kare Ye 5 Upay

1. Take a bath with raw milk. Take a bath with raw milk

One of the easiest ways to have a baby blonde is to use raw milk. You bathe your baby with raw milk while taking a bath. With this, its color will be clear as well as if there is any kind of stain on the body, then it will also be completely clear. In this way your baby will start glowing like milk in a few days.

Also Read: Pregnancy Injection Chart In Hindi


2. Hot Oil Massage | Hot Oil Massage

Hot oil massage is an effective recipe for blonde toddler. If you look in the past, then this recipe has been highly appreciated by our ancestors.

If the child is massaged once a day with hot oil, his face will improve and at the same time his complexion will be blond. But note that the temperature of the oil should be such that it does not harm the baby because the skin of the baby is very soft.

3. Applying milk and gram flour paste will make your baby blonde. By applying Milk and Gram floor paste, your Baby will be Fair

A paste of milk and gram flour is also a great recipe for blonde. For this, you have to add some amount of milk in one teaspoon gram flour and apply it on the baby's skin by making a paste. Do this once a week, this is a recipe whose effects are seen soon. And there is no harm.

By applying milk and gram flour paste, your baby will be fair

4. Fruit juice. Apply Fruit Juice

Fruit juice is also a good option for blond baby. In the routine of the child, give him a little fruit juice, this will make the baby's skin look soft and fair. At the same time, his digestive system will also start working well.

5. Distance to Soap | Distance from Soap

All soaps sold in the market contain chemical. Which can damage the baby's skin. So never use soap in baby bath. If you want to use any soap, do it with the advice of a doctor.

So this was Bacha Gora Hone Ke Liye Kya Kare? Some ideas of Hope all these measures will give you a good result.

 3 
 on: September 18, 2019, 09:49:57 AM 
Started by Perry5 - Last post by Perry5
I’ve been asked this by a few people and the underlying question is, if I currently have a decent stash, after all debts are paid off, and want to invest after my tax friendly accounts have been funded, should one wait till today’s market pulls back some before investing all of it into their index funds or just keep stashing ala dollar cost averaging or dump all at once??

If you have huge amount of money then I would say you can invest in the cryptocurrency which gives you lot of source of new income earning platform.I have found some of the Cryptocurrency Blogs which are also showing the importance of investment in cryptocurrency for good earning.

 4 
 on: September 09, 2019, 02:41:14 PM 
Started by MeganOwens - Last post by MeganOwens
Introduction

CNC Tool carts are designed especially in order to efficiently store your machine tools. Varieties of choices for a tool cart are needed for an organization according to the kinds of machines they were handling in their industrial area. Hence the market is available with different features carts for CNC, CAPTO and HSK tooling. Uratech is one such manufacturer, who majorly focus on industrial requirement and design their tool carts accordingly? One of those tools they tailored in their manufacturing unit is the CNC Tool cart with Lockable drawers and Peg board.

CNC Tool cart with Lockable drawers and Peg board.

Uratech actually manufacturers many varieties of tool carts, they have really 6 types of CNC tool carts. Every cart has its own uniqueness and advantage, mainly fast moving in the market. In this blog we are particularly going to speak about one CNC Tool cart  that comes with Lockable drawers and Peg board. Due to its uniqueness it is the most wanted product in the industry. The cart is made of Cold rolled steel with a thickness of about 16 gauge, the cart is powder coated inorder to prevent the cart from easy rusting when it is exposed in the extreme industrial conditions. Durable Red nylon was used as inserts to protect Holder tapers due to its physical and chemical properties and which has high capability for thermal resistance. Cart comes with black anodized aluminum handles in order to handle the cart.2 support trays in the front and bottom of the cart is provided in order to store consumable.



Heavy duty smooth rolling industrial castors which can withhold up to 1200 lbs, the cart has 4 castors in that 2 were rigid and the other 2 has swivels (wheels with breaks), which drives the cart and controls its movement in the industrial floor .In order to cop up with the toughest industrial floor these castors were designed heavily to withstand and bear huge load and capacity, since it was one of the main reason for the carts lifetime.

How it is different from other CNC Tool Carts

Normally Uratech is very peculiar in selecting up the raw material and each product with its uniqueness and has high capability to withdraw its features and can be utilized for a longer run. It has peg boards with hooks and plastic bins for hanging tools and for placing nuts and bolts securely in plastic bin.3 drawers with ball bearing slides and lockable options to secure the valuable(Keyed internal lock system). The slides length is about 16 inches. The 3 cabinets of dimensions 26.5”*12”(wide)*12”(height, each drawers can hold 75lb.

CNC Tool cart with Lockable drawers and peg board has parts cabinet which has 9 drawers and dividers, these dividers were adjustable one and these CNC Tool cabinets  are of dimensions 18.000” long  x 12.000” wide x 11.000” ( Height ) and the cabinet drawer size is 11.250” long  x 5.000” x 3.000”

Why it is the most needed

Due its longer run it is the most needed product in the market. More particularly it has that storage unit, which is capable of storing the entire essential in the work area safely. This avoids a lot of mess in the work area .Employees can store expensive tools safely and other measuring instruments like scale,tapes,calculators,vernier caliper, screws, bolts and etc. Both the machine tools and the essentials all are available in the same, and then a whole lot of effort in safeguarding these things will be very simple in a single cart. More preferably these carts were movable one; they can be easily transported from one place to another according to the convenience of work. Our carts gives a safe, comfort and easily transportable space for all the tools and essentials in one single common cart, that’s why it is the most needed one in the industry. It is highly beneficial to buy this cart as it composes of the whole lot feature and very cost effective too. The total weight of the cart is about 150lbs and the art dimension is 20”*40”*38”(height from the ground)

Conclusion

Choosing wisely according to your requirement, can save lot of your investment. Not only investment it further increases your production level. Never miss a cart like ours, which has many unique features and has lots of options available in a single, actually a greatest friend for both your employers and machines. Call us today and talk to our specialist to find the right Tooling storage solutions for your CNC Machines at  716 949 4237 or email us at Info@Uratechusa.com

 5 
 on: September 08, 2019, 06:30:48 PM 
Started by PatrickMcCabe - Last post by PatrickMcCabe
bolero top model price presents quite a decent and well mannered vehicle in form of Bolero that gives an unmatched performance over rural paths. The 2523cc engine that churns power worth 64PS helps Bolero deliver mileage worth 16kmpl which is confirmed by ARAI. Though the performance may vary in various conditions, for e.g. on a hot summer day when you need Air Conditioner throughout the day the mileage figure may go down to 13kmpl. On traffic stricken city roads the same figure comes down to 12kmpl. The Micro Hybrid system plays a great role in improving its fuel efficiency to a larger extent.

 6 
 on: September 07, 2019, 12:04:16 PM 
Started by MeganOwens - Last post by MeganOwens
UratechUSA is a decade old concern, knowing the market standards and industrial needs. A clear understanding and the well-versed experience in the machining field guides us to create the feasible CNC storage cabinets with fine quality. Uratech always excels in their product design and quality, which helps the customer to safeguard their work place and investments. Our tool cart offers the best support to the machine tools which tends the business to increase their productivity.

A clear market study helps us to design the fine quality product which fits most of the industrial requirement. To withstand a longer run, the raw material used for manufacturing our tool carts are particularly hand-picked with extra care.CNC Tool trolley is our major product which is highly demandable one in the market. According to your industrial area and specifications, you can pick the best from our variety of tool storage trolleys we manufacture. Here in this blog, you can able to learn more about the types of cabinets storage tool that we manufacture and the raw materials used to build it.

Types of CNC Tool Cart We Manufacture:


The need of CNC tool storage cabinets will differ according to the industries. To offer the vital requirements of the customer, UratechUSA manufactures 6 types of industry specific CNC Tool carts, which suit the best for all type of industries.

•   Floor Model (All types of CNC Holders)
•   Steps Model (All types of CNC Holders)
•   Ladder Model (All types of CNC Holders)
•   Shelf Model (All types of CNC Holders)
•   Secured Model (All types of CNC Holders)
•   Bench Model (All types of CNC Holders)


Cold Rolled Steel:

Cold rolled steel is a type of raw material used in our unique CNC trolley manufacturing. In this process the steel metal is used to roll in the room temperature which helps the sheet to have perfect finishing and gives a good look to the CNC cart. Therefore, there will be no extra patching works needed to make it look properly. For our specific CNC tool cart, we use (16 gauge Thickness, 1.6mm (0.063”)) to gain High Strength & Durability.

Nylon Inserts:


Due to its thermoplastic feature and its ability to withstand heat, nylons were used as the raw material for inserts. It also gives us the great advantage of having greater rigidity and strength. Nylon was the first commercially successful synthetic thermoplastic polymer. These inserts were used in the industrial area to safeguard the tools, particularly the workplace which emits greater amount of heat.


Uratech offers 2 variants of inserts, one is lockable and the other is unlockable.
Lockable inserts firmly hold the tool in one position which prevents the Holders from Shaking while moving through rough surfaces. The lockable tool storage trolleys has its unique features which makes it the fastest moving model in the industry. UnLockable inserts can also hold the machine tools, and these types of inserts are used for specific purposes. So, according to your requirements, you can choose the best which suits your ideal needs.
 Powder Coating:
 

Powder coating is a procedure in which the paint is sprayed over the material to give a perfect finish to the product. Since cold rolled steel is the raw material, this particular method gives a unique and mirror finishing to the cart. Its unique feature offers the CNC tool cart products to resist from corrosion and it offers rust free industrial environment.


Nuts with Nylon:

The perfect assembly structured tool should withhold the capacity of the tool within the body strength of a tool cart. When the parts of the CNC storage cabinets are fixed and screwed perfectly, it can bear a huge load. So, a p perfect screwing and fixing should be done to avoid accidental damages. For the finest body structure and fitness of the Cart, we use Nylon inserted nuts. Nuts with the nylon piece at the end of it help to avoid the loosening of the tool when used in the rough industrial floor. It seems the nuts and bolts were very small figure, but when compared to the lifetime of the tool, they play a major part of it.

Aluminium handle:

Due to its lightweight, corrosion resistance, non-magnetic and many other features, aluminium is used as the raw material in most of the industrial products. At Uratech, we make use of aluminium as the raw material to make the finest tool handles which withstands for a long.

Peg Boards:


Pegboards are used in some of the CNC tool carts, as they help in hanging the tools in the stand for easy access. For slightly bigger or varied tools the hooks also differ as it needs to withstand the weight. These peg boards save a lot of time as it helps the workers to have a simple access to their tool needs whenever they require. It can also avoid lots of mess in the work area.

 
Castors:


Castors are the most important material for the movement of the cart on the working floor. There are 2 types of materials which were used in manufacturing our tooling storage solutions. One is rigid which allows only forward and backward movements and another one with swivels which are responsible for multiple directions. These swivels castors have the feature of breaks which allows us to control the cart quite easily. Polyurethane Caster Wheels with Ball Bearings resist most chemicals, cushion loads, and help in protecting floors. Ball bearings allow wheels to run directly on the axle or spanner bushing. Polyurethane cores help cushion loads and offer superior chemical and water resistance. These castors are made up of polyurethane to ensure smooth rolling in the industrial area. They can able to withhold a load capacity of up to 11000lbs.

Visit our website or call us anytime to know more details about the variant of CNC tool carts that UratechUSA manufactures. If there is customization to be done in the products according to your industrial needs, we deliver the best which suits your ideal requirements.

 7 
 on: September 06, 2019, 08:30:20 PM 
Started by JoanPalmer - Last post by JoanPalmer
Liquid solder is generally considered for industrial usage. Now a days, it is becoming a household need as well. Hence, it is only right that you know the basics of how to use a liquid solder. It is used for soldering purposes. Soldering is a process to bond two metal surfaces together and these liquid solders are one of the user agents that helps us achieve it. They are bound to be really strong adhesives for they need to join metals.

LET’S GO THROUGH THESE STEPS TO LEARN HOW TO USE A LIQUID SOLDER

STEP 1: GET YOUR TOOL KIT READY.

Soldering manuals prescribe specific paraphernalia. So, the first step should be to get these things ready. Choose your Liquid Solder Guide flux. Solder paste in tubes works as a better liquid solder for electronics. Those available in cans are also widely used. However, that works for where the larger surface areas need soldering.

STEP 2: CHECK THE SURFACES TO BE SOLDERED.

The second step is to make sure that the chosen surfaces have been properly cleaned and smoothed. Remove all possible obstacles that could hinder the process of soldering. And last but not the least, ensure that the surfaces and their material contain no moisture.

STEP 3: HOW TO APPLY.

Be prepared with your adhesive. You should take due precautions at this stage. Never touch the solder paste. Melted soldering flux is bound to be hot. Even tube and can users need to take care of. Can users use a stick to apply the adhesive, probably a wooden one? The application of liquid solder flux must be done on both the surfaces.

STEP 4: MAINTENANCE RIGHT AFTER APPLICATION.

This is an important step to ensure that the result is foolproof. It ensures that the soldering attains the required/maximum adhesive strength. The soldered point should not be disturbed. The slightest disturbance can lead to various effects on the soldered point. It can even undergo complete rupture if the disturbance is too unbearable. So it is better to leave the soldered surfaces undisturbed. The basic norm is to not disturb the bonded surfaces for the next 24 hours. It can vary according to the material of the joined surfaces, quality of the liquid solder and the surrounding temperature. Also, it is advised not to use water or any other liquid for cooling.

STEP 5: DESOLDERING

Learning about soldering is incomplete without learning desoldering. It is the process of removal of solder. Though it is more complicated, it can be done easily in some cases. Acetone, a readily available product in the market, can help to desolder. You can apply acetone to the joint and let the effect take place.

AVAILABILITY:

The market is flooded with an extensive range of liquid solder flux.O’Reilly is one of the popular brands among customers. They manufacture all kinds of soldering equipment along with liquid solder flux. They are even available online. The prices of these products are within an affordable range.

P.S. – DIY. Yes, you can always make your own liquid solder flux for electronic devices. But the first master how to use liquid solder.

 8 
 on: September 05, 2019, 06:15:48 PM 
Started by glowdiators92 - Last post by glowdiators92
Dance is an art form which is an amalgamation of body rhythm, body balance with the music to express an idea or an emotion. The motion of the body spreads aesthetic and elegant vibes in the minds of the viewer. Every dance form has evolved from time to time, but the expression and feeling remained intact. Dance has different styles which can be

1.   Classical (India)
2.   Hip-Hop
3.   Salsa (Cuba)
4.   Ballet(Russia)
5.   Break-dance(USA)
6.   Flamenco(Spain)
7.   Belly-dancing(Middle-East)
8.   Tango(Argentina)
9.   Kabuki(Japan)
10.   Samba(Brazil)
11.   Bhangra(India)
12.   Jazz

There is a vast number of professional dancers in every corner of the world. India too comprises a significant amount of professional dancers. Several dance organizations, schools, groups have come up or coming up in India to showcase the talent of dance. Several dance group in delhi promote innovative approach in their dance form and grabs deep connection to the masses.

Inspiration to Tron dance

Tron Dance is a newly evolved dance form which creates a balance between music, dance, and light. The striking feature of this form of dance is the use of lights in the costume of dancers. The origin of Tron dance goes back to the late 80's sci-fi movie-'Tron'. The plot talked about a computer programmer who got trapped in a chaos of complicated software world. Later, it talks about how he manages to escape from it.

The glamour of Tron Dance

Tron Dance acts have created havoc excitements in the field of performing art and in the minds of dance enthusiasts. It is quite alluring and at the same time exhilarating dance form. It has a right mix of dance and technology, and thus many professional dancers are taking this dance form leading to the increased fan base. It deals with electronic devices which are fitted in the costumes of the dancers to provide the required glamour in the dance. led tron dance is the one such subform which uses light-emitting diodes to create an elaborate enlightened effect.

To introduce innovation, dancers maintain an irregularity cycle in switching the LED's on and off during their movement. Music plays a vital role in this form. EDM(electronic dance music) is the sole type of music which goes hand in hand with the dance form. The amalgamation of EDM and Tron dance leads to a new dimension of experience and hence renders the audience speechless. 

Tron dance in the Indian context

tron dance group india has started the induction of Tron Dance in India around 2007. It is now a full-fledged practiced dance form and taught in several dance groups. More and more groups are incorporating it, optimizing it by creating a fusion with other dance forms be it with bhangra or classical dance forms. They try to introduce several innovative concepts with the dimension of light and electronics.

Types of dance styles optimized till now;

The dance group is always welcoming, attractive and innovative in their actions. They try to implement elegant, aesthetic elements and concepts to portray their motto. Some of the most performed dance styles in this domain are as follows.

Alien Tron dance

In this form of dance, the performers used to wear costumes fitted with neon or LED lights or  Tron suits (which are coated with silicon- LED strips) to maximize the glow in the performance. The costumes designed in such a way that it will create a heavenly environment. The background is usually darkened and with the brightness of LED's it provides the required exotic flavor to the dance. Typically, three or five dancers perform this act.

MJ Tron Dance

Fusion is the sole theme of innovation in their dance, and they beautifully introduce several elements into the typical Tron dance. This dance form deals with the breakdance of legendary Micheal Jackson. They perform the famous moonwalk step in their elegant lighted suits with electronic dance music playing around.

Bhangra Tron dance

While performing in India, they try to introduce the Indian element into the Tron acts. Bhangra is the most induced one for the fusion.

Conclusion

With coming years, it will be a provide a significant thrust in the dancing industry. Many dance reality shows are taking an interest in this form recently to make it more accessible and mainstream. Dancers are also implementing this in their acts to participate in various dance reality shows. Sooner or later, it will be a big thing in the arena of performing arts.

 9 
 on: September 03, 2019, 07:05:23 AM 
Started by xencatfit7 - Last post by xencatfit7
As gyms are getting trendier, more and more people are looking forward to joining the sessions either for maintaining their health or for building a healthy body. Along with the gym hours, they are looking for a healthy diet too. But is it only the working hours and the diet that needs proper attention?

A prime mistake carried out by many gym joiners is avoiding the right outfit for exercising. After a workout, you are sure to feel tired, exhausted, sore, and above all, sweaty. And hence, the clothes you wear during the workout is essential. Several factors add to the comfort of your workout clothes, and therefore, selecting the best is critical.

Are you also looking for gents or ladies gym wear online? Here are some of the essential things you need to look after getting the right one in your bag.

•        Look for a riveting sweat fabric
While looking for the best clothes for workout sessions, make sure you go for a material that keeps the moisture away from your body. Go for a fabric that is sweat-wicking for both top and bottom wear. Such clothes help in keeping your body temperature-controlled and dry while you work hard in the gym. When your body is free from sweat, you would be able to focus more on your training sessions for improving your performance. It would also keep you comfortable during exercising. Along with the clothes, you can also look for a sweat-wicking bandana or headband to protect your face.
 
•        Free movements
What if you raise your hand to bend and stop at a particular angle? Whether it is gym, yoga, or any other exercise session, a workout would include various movements considering your entire body. And when the angles are restricted, it is undoubtedly going to irritate you with all the awkwardness. Hence, when you buy womens gym wear online, make sure it allows you for any movements or mobility. The clothes shouldn’t restrict your motion range to hurt your joints, posture, or any injury risk. So, look for stretchy clothes and light which provides you with a full range of motion along with comfort.
 
•        Look for compression wear
Compression gear is getting popular these days. The gear not only supports you but also enhances functional recovery too. The compression wear keeps the sweat and moisture away and allows you to move your body freely as you exercise. For the people with joint issues wearing compression, clothes would support the joints and reduce the chances of any injuries. For the women, wearing compression leggings and tops along with sports bra would help in proper alignment of everything for a comfortable training session. You can also look for hand or wrist bands with similar material.
 
•        Don’t avoid the footwear
Yes, not only the clothes but the footwear you choose also plays a vital role during your workout. No doubt, there are various options to select from, it is ideal to go with the shoes that are perfect according to your foot shape as well as suitable to your step. Again, barefoot sessions are getting more popular these days, yet, wearing the right footwear is advisable to provide your foot with required care while you jump or apply pressure on the foot. So, look for some professional help while selecting the footwear for a good workout session.
 
•        Count on the seasons too!
Surprisingly, the season also matters when you select the right gym wear. If you are working outdoors or even while working out in the gym, you need to make particular changes in the dressing. During summers, look for a fabric that keeps the sweat away from your skin and allows it to breathe. During winters, look for inner clothes that keep the sweat away combined with an outer layer that comes with insulated facilities.
 
Along with all these, while you by gym wear for men online, it is also essential to focus on the accessories like the gym towel, headbands, socks, etc. that adds extra comfort to your workout. So, get ready with the right gym wear and boost your performance levels for healthy physic.

 10 
 on: August 23, 2019, 09:44:23 PM 
Started by glowdiators10 - Last post by glowdiators10
Gone are the days when the traditional dance forms were ruling the stages. Today, various dance forms practiced globally. The traditional dance forms are facing fierce competition with the introduction of the new dance forms.

And the led tron dance form is among the trendiest dance forms which include the use of the latest technology. The dance forms are performed by expert dancers who are visually alluring and brings the wow factor for the audience.

But what is LED Tron dance? Let’s explore all the necessary things related to dance forms.

Tron Dance – An Introduction

Tron dance is a dance form that is carried out with LED lights. The LED dance group performs the magical dance using LED lights suits and music-making out different figures with it. The LED suit is inclusive of various safety fuses and structures eliminating unwanted accidents at the time of performance. Perhaps the most important facet of the LED system is the controlling software that manages the formation and playing of the dance, which is harmonized with the music effectually. The entire group works well in matching the colors and operating according to the sequence for giving the viewers a mesmerizing performance.

Types of Tron dances:

The beautiful LED dance group comes up with various forms and styles for giving artistic dances to different audiences for different audiences. Some of the dance forms widely performed include:

•   Skeleton Dance
•   Visual Tron
•   Interactive Act
•   Tron LED dance
•   Tron Bhangra
•   Laser Man Show
•   Visual Pixel Poi
•   Customised Acts
•   LED Buugeng Show
•   LED Drummers
•   Robots
•   Bollywood Tron and many more in the list.

Each dance form comes with a unique exquisiteness that leaves an appealing glimpse of mind-blowing and energetic dances. Be it, small children, young audiences, or even the grown-up elders, the led dance group is sure to keep you glued to their chairs till the end.

Why is Tron Dance famous than other dance forms?

The LED dance company india, is becoming popular compared to other dance forms carried out worldwide. Here are some of the reasons for its popularity.

•   Attractive Visuals–The LED suits are much different for every dancer in the group. The clothes become the identity of the dancer, and the behavior of the dancer is similar to what he appears in the dance. The attractive visuals provided to the viewers through three types of costumes, namely LED Analog suits, LED digital suits and EI Wire costumes.
•   Unknown numbers –The LED Tron dance is carried out in the dark. All that the viewers would see is the change in the light sequence, which provides with different figures in motion. Hence, it becomes difficult for the viewers to know the number of dancers performing on the stage.
•   Exciting skills–The group of dancers performing the dance are experts of the field. Highly artistic in the dance form, they come with immense practice and experience in dancing with the LED lights and costumes in the shows. Again, the entire dance is carried out in the dark, which is itself a huge challenge.
•   Technology –The Tron dance is performed using various software and hardware. With the help of multiple controllers, the show gets promoted with limited efforts. The technology synchronized with the music and the beats along with the lasers, LED screens and the lights.

These are some of the few reasons which have added to the popularity of the Tron dance among other dance forms globally.

How can Tron Dance help in promoting any brand?

The admiration of the LED Tron dance has made it one of the means of promoting any business. The dance form has added to the goodwill and customer base of the organization. The Tron dance has made the tricky business of marketing quite easy and effective for the organizations. Again, as the dance form is growing prevalent among the viewers, it has managed in creating mind-blowing illusions. Hence, with the help of various themes and selected dancers, branding of the product can be carried out naturally for the public to grab their attention.

The Tron dance is hence a fascinating dance form which comes with a clear theme and objective that leaves an unforgettable impression on the minds of the viewers.

Pages: [1] 2 3 ... 10
Powered by MySQL Powered by PHP Powered by SMF 1.1.13 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!